DrawTite Electrical
Power Converter
    WHEN DO I NEED A TAILLIGHT CONVERTER?
    Most trailers operate on a two wire system where the brake lights and turn signals operate on the same wire. When the towing vehicle has separate wires for brake lights and turn signals, a taillight converter is required.

    CHOOSING THE RIGHT CONVERTER
    The converter you choose depends on the type of trailer you'll be towing and the car or truck you'll be towing it with. Be sure to consult your owner's manual for their recommendations.


ModuLite® HD Protector
DrawTite ModuLite® HD Protector
  • Converts vehicle functions from a 3 wire system to a trailer 2 wire system
  • Draws Power directly from the Vehicle Battery and only uses less then 5 milliamps of the vehicle circuit for sensing (Standby Current < 2mA) to turn the trailer functions on and off
  • Heavy-Duty! Rated for up to 4.2 amps for Turns/Stop circuits and 7.5 amps for the Taillight circuit
  • Has integrated re-settable Short Circuit and Overload protection, to safeguard itself and the tow vehicle from shorts and installation wiring mishaps
  • All-solid state components in potted encapsulation
  • Works with either LED or Incandescent bulbs (input/output)this gives trailer lights full brightness
  • Designed not to send feedback thru the vehicle circuits
  • Interprets/decodes multiplex signal inputs (BMW & Mercedes applications)
 
 Part No. Description
 119190 ModuLite® HD Protector w/Integrated Circuit & Overload Protection Trailer Light Power Module
 119191 ModuLite® HD Protector w/Integrated Circuit & Overload Protection Trailer Light Power Module & Installation Kit

ModuLite® Protector
DrawTite ModuLite® Protector The Modulite® with short circuit protector, adds integrated short circuit protection that safeguards itself and the tow vehicle against harmful electrical shorts and mis-wire situations.
  • Stop and turn functions rated for up to 2.1 Amps
  • Taillight functions rated for up to 5.6 Amps
 
 Part No. Description
 119177 ModuLite® Protector w/Integrated Circuit & Overload Protection & 5-Flat Connector for Backup Light or Surge Brake Lockout Circuit

ModuLite® Power Module
DrawTite ModuLite® Power Module
  • Virtually eliminates additional electrical draw on the vehicle's taillight circuits
  • Ensures maximum trailer light brightness
  • Powers the trailer's stop, turn, tail and running lights without overloading vehicle electrical systems
  • Compatible with 2 & 3 wire systems
  • No converter is required
  • Eliminates the need for heavy duty flashers
 
 Part No. Description
 119146 ModuLite® Trailer Light Power Module

ModuLite® Wiring Kit
DrawTite ModuLite® Wiring Kit  
 Part No. Description
 118151 Wiring Kit for Installing #118146, #118176, #118187 & #118190 ModuLite® Power Modules, Includes 20 ft. Undercar Wire, Fuse w/Holder and Attaching Terminals

ModuLite® Protector
DrawTite ModuLite® Protector The Modulite® with short circuit protector, adds integrated short circuit protection that safeguards itself and the tow vehicle against harmful electrical shorts and mis-wire situations.
  • Stop and turn functions rated for up to 2.1 Amps
  • Taillight functions rated for up to 5.6 Amps
 
 Part No. Description
 119176 ModuLite® Protector w/Integrated Circuit Protection
 119186 ModuLite® Protector w/Integrated Circuit Protection & Installation Kit

©2009 Cequent Towing Products   ||   47774 Anchor Court West   ||   Plymouth, MI 48170